Install Wi-Fi Dongle on Yealink Phone

Install Wi-Fi Dongle on Yealink Phone

  1. Disconnect the data cable from the internet port on the back of the phone. 
  2. Insert the dongle into the usb port on the top back of phone. 
  3. The message “Wi-Fi adapter has been added, scanning the available wireless network right now?” 
  4. Select the OK button 
  5. You will see the message “Scanning…..”   and will be presented with some information. 
  6. On the first line, make sure that the Wi-Fi is ON 
  7. Scroll down to Available Networks and select the ENTER key 
  8. Scroll to your wireless device and select the CONNECT key 
  9. Depending on your wireless device you may be prompted to enter your Wi-Fi password. 
  10. Use the number pad on the phone to enter your password.  By default the number pad will enter numbers. 
  11. To change to letters, select the 123 key and the option will change to abc.  You can now enter letters for your password.  To enter the letter “a” press the #2 key once.  To enter the letter “c” press the #2 key three times, etc.  For a space, press the 0 key. (Flashback to texting on your flip phone). 
  12. After entering the password correctly you should be prompted you have been connected to your Wi-Fi.  
  13. (It shouldn’t take more than 2 or 3 tries to get it right). 
  14. You may have to reboot your phone by disconnecting the power cord and reconnecting it. 
 

NOTES:   

  1. You must have a power cable connected to your phone to use the Wi-Fi dongle.  If you were getting power to your phone through the data cable, you must add a power adapter to supply power. 
  2. You WILL experience problems if you have both the Wi-Fi dongle and data cable connected to your phone. 

    • Related Articles

    • Create Directory on a Yealink Phone

      Go to the UC-Portal with your username and password or your portal administrator get your provisioning password.    In UC-Portal go to “Select Applications > Account Manager”    After selecting “Account Manager” select “Settings” from top menu and ...

    • Enable and Disable Call Forwarding on a Yealink Phone

      There are three types of call forwarding that can be configured on a Yealink phone. “Always forward”, “busy forward”, and “no answer forward”. Always Forward will unconditionally forward all calls made to your phone to the specified telephone ...

    • Yealink Quick Feature Guide

      Place a call: You do not have to select a line or dial 9 or dial 1 for long distance. Simply dial the 10-digit number. To bypass the pause after dialing, press “send” or “OK”. Blind transfer: While on the call, press “transfer”, , “transfer”. Hang ...

    • How to Add a Logo to a T46 phone

      First: Log into your portal at mypbx.fonelogix.com Select Settingsfrom menu across top Select Service tab Scroll down to Provisioning Server Info Write down or copy Provisioning Password (you will need this later) On your phone: Select the Menu ...

    • Forward Inbound Call to Cell Phone

      Log in to portal mypbx.fonelogix.com using your username and password  Select SERVICES from menu bar across top of page  Select EXTENSIONS from side bar menu  Select your extension number from list of extensions  Under the Routing & Configuration ...