How to Add a Logo to a T46 phone

How to Add a Logo to a T46 phone

First:
  1. Log into your portal at mypbx.fonelogix.com
  2. Select Settingsfrom menu across top
  3. Select Service tab
  4. Scroll down to Provisioning Server Info
  5. Write down or copy Provisioning Password (you will need this later)
On your phone:
  1. Select the Menu button
  2. With the Status option highlighted press the Enter button
  3. Note the IPv4 address, ie 192.168.2.111
  4. Open a browser and type in the above Ipv4 address ONLY in the address bar, no www or anything else. This will open up a login to your phone.
  5. The Username is: admin
  6. The Password is the Provisioning Password you obtained earlier
  7. Select Confirm to enter phone configuration
  8. Select the Settings tab along the top and Preference along the side should be highlighted
  9. Find the option Upload Wallpaper and select Choose File
  10. Browse to your file location and select your file
  11. Choose the Upload button and then use the pulldown list in the Wallpaper option above to select your file
  12. Choose the Confirm button at the bottom and you should see your logo on your phone
  1. Logo should be no bigger than 480x272 and be in bmp, jpg or png format


    • Related Articles

    • Install Wi-Fi Dongle on Yealink Phone

      Disconnect the data cable from the internet port on the back of the phone.  Insert the dongle into the usb port on the top back of phone.  The message “Wi-Fi adapter has been added, scanning the available wireless network right now?”  Select the OK ...

    • Create Directory on a Yealink Phone

      Go to the UC-Portal with your username and password or your portal administrator get your provisioning password.    In UC-Portal go to “Select Applications > Account Manager”    After selecting “Account Manager” select “Settings” from top menu and ...

    • Enable and Disable Call Forwarding on a Yealink Phone

      There are three types of call forwarding that can be configured on a Yealink phone. “Always forward”, “busy forward”, and “no answer forward”. Always Forward will unconditionally forward all calls made to your phone to the specified telephone ...

    • Forward Inbound Call to Cell Phone

      Log in to portal mypbx.fonelogix.com using your username and password  Select SERVICES from menu bar across top of page  Select EXTENSIONS from side bar menu  Select your extension number from list of extensions  Under the Routing & Configuration ...

    • Yealink Quick Feature Guide

      Place a call: You do not have to select a line or dial 9 or dial 1 for long distance. Simply dial the 10-digit number. To bypass the pause after dialing, press “send” or “OK”. Blind transfer: While on the call, press “transfer”, , “transfer”. Hang ...